Adding a battery to a Fronius inverter

A Fronius GEN24 Plus takes Fronius's own Reserva, BYD Battery-Box Premium or LG Flex batteries, and a plain GEN24 can be upgraded to take one. Older Primo and Symo inverters aren't on Fronius's battery list, so the usual route there is a battery with its own inverter alongside, or a new GEN24 Plus.

Compatibility by existing system

“General statement” means the battery maker says it can be added to existing solar in general, without naming Fronius. Your installer should confirm the details.

Your existing systemTesla Powerwall 3Enphase IQ Battery 5Pmyenergi libbiSunsynk W5.3 with ECCO inverter
Fronius Primo single-phase inverter (older, not GEN24)Works via AC couplinggeneral statementNeeds: Tesla Remote Meter and solar CT (as drawn in Tesla's example); Backup Gateway 2 for backupTesla's UK datasheet shows an existing (AC-coupled) solar inverter alongside Powerwall 3, measured by a Tesla Remote Meter with a solar CT. Not specific to this brand.Source: Tesla datasheet, p.7, Partial Home Backup ... and AC Coupled SolarWorks via AC couplinggeneral statementEnphase's UK planning guide covers retrofitting IQ Battery 5P to an existing string-inverter solar system. General statement, not specific to this brand.Backup: Needs an IQ System Controller 3 INT. In backup, the solar that can stay on is limited to 100% of battery power with a string inverter.Source: Enphase manual, Key considerations: Retrofit; sizing guideline 4Works via AC couplinggeneral statementmyenergi says libbi can be added to any existing solar system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableWorks via AC couplinggeneral statementSunsynk says the ECCO hybrid inverter can AC couple to retrofit an existing solar system. General statement, not specific to this brand.Source: Sunsynk datasheet, p.1, features
Fronius Symo three-phase inverter (older, not GEN24)Not documentedNot documentedNot documentedNot documented
Fronius Primo or Symo GEN24 (no battery yet)Not documentedNot documentedNot documentedNot documented
Fronius Primo or Symo GEN24 Plus hybridNot documentedNot documentedNot documentedNot documented

Not listed: Sigenergy SigenStor, Fox ESS EVO 10, SolarEdge Home Battery 400V, Huawei LUNA2000-S1, SolaX X1-IES, EcoFlow OCEAN 2, AlphaESS SMILE-G3, Sungrow SBR. We haven't found manufacturer documentation for adding these to an existing Fronius system, so we don't claim they work.

Which batteries fit your Fronius hybrid

From Fronius's compatible-battery table (largest size that fits each inverter):

BatteryPrimo GEN24 Plus (single-phase)Symo GEN24 Plus (three-phase)
Fronius Reserva Pro12.0–20.012.0–32.0
Fronius Reserva6.3, 9.5 (12.6 on the Primo GEN24 Plus SC)6.3–15.8
BYD Battery-Box Premium HVS / HVS+5.1, 7.75.1–12.8
BYD Battery-Box Premium HVM / HVM+11.0–19.311.0–22.1
LG Flex8.6, 12.98.6–17.2

Figures are the battery model numbers as Fronius lists them. Fronius also lists BYD HVB for its Verto Plus, and BYD HVM for the older Symo Hybrid. Fronius says availability depends on country-specific certification, and the inverter should run the latest software. Source: Fronius, Compatible batteries (page last modified 13 May 2026).

If you have a GEN24 without “Plus”

Fronius says the UP storage software upgrade lets you retrofit a battery connection to a GEN24 at any time, including the Full Backup option. Every GEN24 already has PV Point, which gives up to 3 kW of basic backup while the sun shines.

Backup with a Fronius hybrid

Source: Fronius GEN24 & GEN24 Plus product page.

If you have an older Primo or Symo

The Primo and Symo (without GEN24) don't appear on Fronius's compatible-battery list, so there's no Fronius-listed battery to connect to them directly. On a single-phase Primo, the batteries in the compatibility table above say they can be added to existing solar. Replacing the inverter with a GEN24 Plus is the other route.

Fronius's approved battery list

Fronius publishes the batteries it approves for its hybrid inverters (Primo GEN24 Plus, Symo GEN24 Plus, the older Symo Hybrid and Verto Plus). The models as Fronius lists them:

Battery brandApproved models
Fronius Reserva ProReserva Pro 12.0, 16.0, 20.0 · Reserva Pro 24.0, 28.0, 32.0 (Symo GEN24 Plus / Verto Plus only)
Fronius ReservaReserva 6.3, 9.5 · Reserva 12.6 (not Primo GEN24 Plus) · Reserva 15.8 (Symo GEN24 Plus / Verto Plus only)
BYD Battery-Box Premium HVS / HVS+HVS 5.1, 7.7 · HVS 10.2, 12.8 (Symo GEN24 Plus / Verto Plus only)
BYD Battery-Box Premium HVM / HVM+HVM 11.0, 13.8, 16.6, 19.3 · HVM 22.1 (Symo GEN24 Plus / Verto Plus / Symo Hybrid) · HVM 8.3 (Symo Hybrid only)
BYD Battery-Box HVBHVB 11.8–29.6 (Verto Plus only)
LG FlexFlex 8.6, 12.9 · Flex 17.2 (Symo GEN24 Plus only)

No other brands are on Fronius's list.

  • Fronius says compatibility depends on country-specific certification and availability, and the inverter should run the latest software.
  • Not every size fits every inverter: the largest batteries need a three-phase Symo GEN24 Plus or Verto Plus (see the table above).

Source: Compatible batteries (Fronius hybrid inverters), Page last modified 13 May 2026, Compatible battery storage table. Checked 3 Oct 2026.

Choosing a battery for your Fronius system

Batteries we cover that are documented for at least one Fronius setup. Each page has the full specs, the setups you can buy, published UK prices and head-to-head comparisons.

Tesla Powerwall 3

13.5 kWh usable · sold through installers

Compare: vs SigenStor · vs EVO 10 · vs IQ Battery 5P

Specs, setups and prices

Enphase IQ Battery 5P

5 kWh usable · from £2,875 published price

Compare: vs Powerwall 3 · vs Home Battery 400V

Specs, setups and prices

myenergi libbi

4.6 kWh usable · from £1,600 published price

Compare: vs Powerwall 3

Specs, setups and prices

Sunsynk W5.3 with ECCO inverter

4.79 kWh usable · from £1,395 published price

Compare: vs EVO 10

Specs, setups and prices

Work out what you need

Questions people ask

What battery works with a Fronius GEN24 Plus?

Fronius lists its own Reserva and Reserva Pro, BYD Battery-Box Premium HVS, HVS+, HVM and HVM+, and LG Flex. Not every size suits every inverter: the single-phase Primo GEN24 Plus takes up to Reserva Pro 20.0, Reserva 9.5, HVS 7.7, HVM 19.3 or Flex 12.9.

Can I add a battery to a Fronius GEN24 that isn't a Plus?

Yes. Fronius says its UP storage software upgrade lets you retrofit a battery connection to a GEN24 at any time, including the Full Backup option.

Can I add a battery to an older Fronius Primo or Symo?

The older Primo and Symo inverters aren't on Fronius's battery list. On a single-phase Primo you can add a battery with its own inverter alongside it: myenergi, Tesla, Enphase and Sunsynk say in general terms that their systems can be added to existing solar.

Does a Fronius GEN24 keep the power on in a power cut?

Every GEN24 has PV Point, basic backup of up to 3 kW while the sun shines. Full Backup for the whole home needs a GEN24 Plus, a battery and a switching device to disconnect from the grid. Fronius says Full Backup isn't available on the Symo GEN24 3.0–5.0 Plus.

Can I use a Pylontech or Tesla battery with Fronius?

They aren't on Fronius's compatible-battery list, which names only Fronius, BYD and LG batteries.

Sources

  1. Enphase Energy System planning guide — single-phase backup systems (UK) — Enphase, TEB-00305-1.0, July 2025. Checked 26 Sept 2026.
  2. Powerwall 3 Datasheet (UK) — Tesla, 2026. Checked 26 Sept 2026.
  3. Sunsynk ECCO SUN-3.6/5/6/7.6/8K-SG05LP1-EU datasheet (2022 edition) — Sunsynk. Checked 26 Sept 2026.
  4. libbi Home Battery datasheet (DS-00001) — myenergi, Revision A, October 2023. Checked 26 Sept 2026.
  5. Compatible batteries (Fronius hybrid inverters) — Fronius, Page last modified 13 May 2026. Checked 3 Oct 2026.
  6. Fronius GEN24 & GEN24 Plus product page — Fronius. Checked 3 Oct 2026.

EnergyPicker is independent and not affiliated with Fronius. Always confirm your final design with an MCS-certified installer.