Adding a battery to a Sungrow inverter

Sungrow approves a short list of high-voltage batteries for its SH hybrids: its own SBR (and now SBH), BYD Battery-Box Premium, and, on three-phase models, Pylontech. A single-phase SH RS can take up to 6.6 kW from the battery. If your Sungrow is solar only, you can add a battery with its own inverter alongside it, or swap to an SH RS hybrid.

Compatibility by existing system

“General statement” means the battery maker says it can be added to existing solar in general, without naming Sungrow. Your installer should confirm the details.

Your existing systemSungrow SBRTesla Powerwall 3Enphase IQ Battery 5Pmyenergi libbiSunsynk W5.3 with ECCO inverter
Sungrow single-phase solar-only inverter (no battery input)Not documentedWorks via AC couplinggeneral statementNeeds: Tesla Remote Meter and solar CT (as drawn in Tesla's example); Backup Gateway 2 for backupTesla's UK datasheet shows an existing (AC-coupled) solar inverter alongside Powerwall 3, measured by a Tesla Remote Meter with a solar CT. Not specific to this brand.Source: Tesla datasheet, p.7, Partial Home Backup ... and AC Coupled SolarWorks via AC couplinggeneral statementEnphase's UK planning guide covers retrofitting IQ Battery 5P to an existing string-inverter solar system. General statement, not specific to this brand.Backup: Needs an IQ System Controller 3 INT. In backup, the solar that can stay on is limited to 100% of battery power with a string inverter.Source: Enphase manual, Key considerations: Retrofit; sizing guideline 4Works via AC couplinggeneral statementmyenergi says libbi can be added to any existing solar system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableWorks via AC couplinggeneral statementSunsynk says the ECCO hybrid inverter can AC couple to retrofit an existing solar system. General statement, not specific to this brand.Source: Sunsynk datasheet, p.1, features
Sungrow SH3.0–6.0RS single-phase hybrid inverterCompatibleSungrow's approved-battery list for the SH3.0–6.0RS names SBR064, SBR096, SBR128, SBR160 and SBR192 (battery firmware SBRBCU-S_22011.01.18 or later). The list dates from April 2023.Backup: The SH RS has a built-in backup output (up to 6 kW, switchover under 10 ms).Source: Sungrow compat matrix, SH3.0/3.6/4/0/5.0/6.0RS Series Hybrid Inverters for High Voltage BatterySource: Sungrow datasheet, p.2, Backup dataNot documentedNot documentedWorks via AC couplinggeneral statementmyenergi lists "I have solar and a battery already and want to add more storage" as a supported retrofit: libbi goes alongside the existing system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableNot documented
Sungrow SH5.0–10RT three-phase hybrid inverterCompatibleSungrow's approved-battery list for the three-phase SH5.0–10RT names SBR096 to SBR256 (battery firmware SBRBCU-S_22011.01.05 or later). The list dates from April 2023.Source: Sungrow compat matrix, SH5.0~10RT Series Hybrid Inverters for High Voltage BatteryNot documentedNot documentedNot documentedNot documented

Not listed: Sigenergy SigenStor, Fox ESS EVO 10, SolarEdge Home Battery 400V, Huawei LUNA2000-S1, SolaX X1-IES, EcoFlow OCEAN 2, AlphaESS SMILE-G3. We haven't found manufacturer documentation for adding these to an existing Sungrow system, so we don't claim they work.

Which batteries each Sungrow hybrid takes

Your Sungrow inverterApproved batteries
SH3.0/3.6/4.0/5.0/6.0RS (single-phase)Sungrow SBR064/096/128/160/192 · BYD Battery-Box Premium HVS 5.1/7.7/10.2 and HVM 8.3–19.3. Sungrow's UK page adds SBH100–400 and SBS050.
SH5.0–10RT (three-phase)Sungrow SBR096–256 · BYD Battery-Box Premium HVS 5.1–12.8 and HVM 11.0–22.1 · Pylontech Powercube X1/X2/H1/H2 and Force H1/H2. LG RESU H and the older BYD Battery-Box HV are being discontinued.

For Pylontech on the SH RT, Sungrow recommends at least 4 Powercube X1/X2 or Force H1 units, no more than 11 Powercube H1/H2, and 2 to 4 Force H2. Sources: Sungrow, Approved Batteries with SH Series Hybrid Inverters, EU Version V1.8.1, pp.1–2; Sungrow UK SH RS product page.

What a Sungrow SH RS gives you

From Sungrow's SH3.0–6.0RS datasheet (Version 18):

If your Sungrow is solar only

A Sungrow inverter without a battery input can't take a battery directly. You can add a battery with its own inverter alongside it (see the compatibility table above), or replace it with an SH RS hybrid: Sungrow describes the SH RS as “ideal for both retrofitting and new installations”.

Sungrow's approved battery list

Sungrow publishes the batteries it approves for its SH series hybrid inverters (EU approved-battery list). These are the brands UK buyers ask about most, with the models as Sungrow lists them.

Battery brandApproved models
Sungrow SBRSBR064/096/128/160/192 (SH RS) · SBR096/128/160/192/224/256 (SH RT)
BYDBattery-Box Premium HVS 5.1/7.7/10.2 (SH RS; also 12.8 on SH RT) · Battery-Box Premium HVM 8.3–19.3 (SH RS) / 11.0–22.1 (SH RT) · Battery-Box HV 5.1–11.5 (SH RT, being discontinued)
PylontechPowercube-X1/X2/H1/H2 (SH RT) · Force H1/H2 (SH RT)
LG ChemRESU7H_Type_R, RESU10H_Type_R (SH RT, being discontinued)

Also on the list: GCL (SH3K6/4K6 only), Tawaki (SH3K6/4K6 only).

  • Each battery needs a minimum firmware version, which the list gives; your installer should check it.
  • Sungrow says it may not provide technical support for installations with batteries that aren't approved.
  • LG RESU H and the older BYD Battery-Box HV are marked as being discontinued.
  • The list (April 2023) predates Sungrow's SBH battery. Sungrow's UK product page says the SH RS works with SBH, SBR and SBS050 batteries.
  • For the phased-out SH3K6 and SH4K6 low-voltage hybrids, the list also approves LG RESU 3.3–13 and 6.4EX, Pylontech US2000B and Phantom-S, GCL E-KwBe5.6, Sungrow SBP4K8, BYD low-voltage Battery-Box models and Tawaki MAUI.

Source: Approved Batteries with SH Series Hybrid Inverters, EU Version V1.8.1, pp.1–2. Checked 3 Oct 2026.

Choosing a battery for your Sungrow system

Batteries we cover that are documented for at least one Sungrow setup. Each page has the full specs, the setups you can buy, published UK prices and head-to-head comparisons.

Sungrow SBR

3.2 kWh usable · sold through installers

Compare: vs EVO 10

Specs, setups and prices

Tesla Powerwall 3

13.5 kWh usable · sold through installers

Compare: vs SigenStor · vs EVO 10 · vs IQ Battery 5P

Specs, setups and prices

Enphase IQ Battery 5P

5 kWh usable · from £2,875 published price

Compare: vs Powerwall 3 · vs Home Battery 400V

Specs, setups and prices

myenergi libbi

4.6 kWh usable · from £1,600 published price

Compare: vs Powerwall 3

Specs, setups and prices

Sunsynk W5.3 with ECCO inverter

4.79 kWh usable · from £1,395 published price

Compare: vs EVO 10

Specs, setups and prices

Work out what you need

Questions people ask

What battery works with a Sungrow SH RS hybrid inverter?

Sungrow's EU approved-battery list gives Sungrow's own SBR064–192 and BYD Battery-Box Premium HVS and HVM for the single-phase SH3.0–6.0RS. Sungrow's UK product page also lists its newer SBH battery and the SBS050.

Can I use a Pylontech battery with a Sungrow inverter?

On the three-phase SH5.0–10RT, yes: Sungrow's approved list includes Pylontech Powercube and Force H1/H2, with minimum module counts. For the single-phase SH RS, the list has only Sungrow and BYD batteries.

SBR or SBH: which Sungrow battery do I need?

Both are Sungrow high-voltage LFP batteries that its UK page lists for the SH RS: SBR064–256 covers 6.4–25.6 kWh, and the newer SBH100–400 covers 10–40 kWh. Sungrow's 2023 approved list predates the SBH, so check firmware and pairing with your installer.

How much power can a Sungrow SH RS give from the battery?

Sungrow's datasheet gives up to 6.6 kW battery charge and discharge (30 A), depending on the battery, and backup output up to the inverter's rating (3–6 kW), switching in under 10 ms, with an 8.4 kVA peak for 10 seconds.

My Sungrow inverter is solar only. Can I add a battery?

Yes, alongside it: myenergi, Tesla, Enphase and Sunsynk say in general terms that their systems can be added to existing solar. Or replace it with a Sungrow SH RS hybrid, which Sungrow describes as ideal for retrofitting as well as new installations.

Sources

  1. Enphase Energy System planning guide — single-phase backup systems (UK) — Enphase, TEB-00305-1.0, July 2025. Checked 26 Sept 2026.
  2. Powerwall 3 Datasheet (UK) — Tesla, 2026. Checked 26 Sept 2026.
  3. Sunsynk ECCO SUN-3.6/5/6/7.6/8K-SG05LP1-EU datasheet (2022 edition) — Sunsynk. Checked 26 Sept 2026.
  4. libbi Home Battery datasheet (DS-00001) — myenergi, Revision A, October 2023. Checked 26 Sept 2026.
  5. Approved Batteries with SH Series Hybrid Inverters — Sungrow, EU Version V1.8.1. Checked 3 Oct 2026.
  6. SH3.0/3.6/4.0/5.0/6.0RS datasheet — Sungrow, Version 18. Checked 3 Oct 2026.
  7. SH3.0–6.0RS product page (UK) — Sungrow. Checked 3 Oct 2026.

EnergyPicker is independent and not affiliated with Sungrow. Always confirm your final design with an MCS-certified installer.