Adding a battery to a Growatt inverter

Growatt's storage inverters are designed around Growatt's own batteries, and which one fits depends on your inverter model. Single-phase SPH and SPA inverters take Growatt's low-voltage batteries; battery-ready MIN and MOD inverters take its high-voltage ARK XH or APX. If your Growatt is solar only, you can add a battery with its own inverter alongside it.

Compatibility by existing system

“General statement” means the battery maker says it can be added to existing solar in general, without naming Growatt. Your installer should confirm the details.

Your existing systemTesla Powerwall 3Enphase IQ Battery 5Pmyenergi libbiSunsynk W5.3 with ECCO inverter
Growatt single-phase inverter with no battery input (solar only)Works via AC couplinggeneral statementNeeds: Tesla Remote Meter and solar CT (as drawn in Tesla's example); Backup Gateway 2 for backupTesla's UK datasheet shows an existing (AC-coupled) solar inverter alongside Powerwall 3, measured by a Tesla Remote Meter with a solar CT. Not specific to this brand.Source: Tesla datasheet, p.7, Partial Home Backup ... and AC Coupled SolarWorks via AC couplinggeneral statementEnphase's UK planning guide covers retrofitting IQ Battery 5P to an existing string-inverter solar system. General statement, not specific to this brand.Backup: Needs an IQ System Controller 3 INT. In backup, the solar that can stay on is limited to 100% of battery power with a string inverter.Source: Enphase manual, Key considerations: Retrofit; sizing guideline 4Works via AC couplinggeneral statementmyenergi says libbi can be added to any existing solar system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableWorks via AC couplinggeneral statementSunsynk says the ECCO hybrid inverter can AC couple to retrofit an existing solar system. General statement, not specific to this brand.Source: Sunsynk datasheet, p.1, features
Growatt MIN TL-XH / TL-XH2 single-phase inverter (battery-ready)Works via AC couplinggeneral statementNeeds: Tesla Remote Meter and solar CT (as drawn in Tesla's example); Backup Gateway 2 for backupTesla's UK datasheet shows an existing (AC-coupled) solar inverter alongside Powerwall 3, measured by a Tesla Remote Meter with a solar CT. Not specific to this brand.Source: Tesla datasheet, p.7, Partial Home Backup ... and AC Coupled SolarWorks via AC couplinggeneral statementEnphase's UK planning guide covers retrofitting IQ Battery 5P to an existing string-inverter solar system. General statement, not specific to this brand.Backup: Needs an IQ System Controller 3 INT. In backup, the solar that can stay on is limited to 100% of battery power with a string inverter.Source: Enphase manual, Key considerations: Retrofit; sizing guideline 4Works via AC couplinggeneral statementmyenergi says libbi can be added to any existing solar system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableWorks via AC couplinggeneral statementSunsynk says the ECCO hybrid inverter can AC couple to retrofit an existing solar system. General statement, not specific to this brand.Source: Sunsynk datasheet, p.1, features
Growatt SPH TL BL-UP single-phase hybrid inverterNot documentedNot documentedWorks via AC couplinggeneral statementmyenergi lists "I have solar and a battery already and want to add more storage" as a supported retrofit: libbi goes alongside the existing system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableNot documented
Growatt three-phase inverter (MOD TL3-XH, SPH or SPA TL3 BH-UP)Not documentedNot documentedNot documentedNot documented

Not listed: Sigenergy SigenStor, Fox ESS EVO 10, SolarEdge Home Battery 400V, Huawei LUNA2000-S1, SolaX X1-IES, EcoFlow OCEAN 2, AlphaESS SMILE-G3, Sungrow SBR. We haven't found manufacturer documentation for adding these to an existing Growatt system, so we don't claim they work.

Which Growatt battery fits your inverter

Your model is on the label on the side of the inverter. From Growatt's configuration list and current datasheets:

Your Growatt inverterGrowatt batteries listedStorage range
SPH 3000-6000TL BL-UP (single-phase hybrid), SPA 1000-3000TL BLARK LV, AXE LV, ALP LV, GBLI 6532 (low voltage)2.5 kWh up to 50 kWh, depending on the battery
MIN 2500-6000TL-XH (single-phase, battery-ready)ARK XH (with BDC 95045-A1) or APX HV (with APX 55027-P0)ARK XH 5.12–17.92 kWh · APX HV 5–30 kWh
MIN 2500-6000TL-XH2 (newer)APX 5.0-30.0P-S0 or APX 5.0-30.0M-S35–30 kWh
MOD 3000-10000TL3-XH (three-phase, battery-ready)ARK XH, or APX HV on the XH(BP) versionARK XH 7.68–25.6 kWh · APX 5–30 kWh
SPH/SPA 4000-10000TL3 BH-UP (three-phase)ARK HV (with HVC 60050-A1)7.68–25.6 kWh

Sources: Growatt Energy Storage Configuration Quick Check List (January 2024), pp.1–2; MIN 2500-6000TL-XH2 datasheet (202607) and MOD 3000-10000TL3-XH(BP) datasheet (202608), Input data (DC battery).

How much power a Growatt hybrid gives you

The inverter, not the battery, sets how fast the battery can charge and discharge:

Sources: Growatt SPH 3000-6000TL BL-UP datasheet (202604), Battery data and Backup power; MIN TL-XH2 and MOD TL3-XH(BP) datasheets, Input data (DC battery) and footnotes.

If your Growatt is solar only

Growatt describes its XH and XH2 inverters as battery-ready, with a battery interface built in; check whether your model has “XH” in its name. If it has no battery input, you can add a battery with its own inverter next to it (see the compatibility table above), or Growatt's own AC-coupled SPA inverter with a Growatt battery. Growatt lists the SPA range under “AC-Coupled Inverter” in its product centre.

Growatt's approved battery list

Growatt publishes the batteries it approves for its single-phase SPH and SPA storage inverters (its configuration list and the SPH BL-UP manual). The models as Growatt lists them:

Battery brandApproved models
Growatt ARK LVARK 2.5L-A1 (2.5–25.6 kWh, 1–10 in parallel)
Growatt AXE LVAXE 5.0L-C1 (5–50 kWh, 1–10 in parallel)
Growatt ALP LVALP 5.0L-E2-EU (5–40 kWh, 1–8 in parallel)
Growatt GBLI 6532GBLI 6532 (6.5–26 kWh, 1–4 in parallel)

No other brands are on Growatt's list.

  • Growatt's SPH BL-UP manual says that if the inverter is paired with a lithium battery, the battery should be bought from Growatt. A lead-acid battery can be bought elsewhere.
  • The manual also says the meter must be bought from Growatt: other brands' meters won't communicate with the SPH.
  • Growatt's configuration list says these systems need no separate backup box: backup is built into the inverter.

Source: Growatt Energy Storage Configuration Quick Check List, January 2024 (file dated 25 Jan 2024), p.1, LV single-phase energy storage system. Checked 2 Oct 2026.

Choosing a battery for your Growatt system

Batteries we cover that are documented for at least one Growatt setup. Each page has the full specs, the setups you can buy, published UK prices and head-to-head comparisons.

Tesla Powerwall 3

13.5 kWh usable · sold through installers

Compare: vs SigenStor · vs EVO 10 · vs IQ Battery 5P

Specs, setups and prices

Enphase IQ Battery 5P

5 kWh usable · from £2,875 published price

Compare: vs Powerwall 3 · vs Home Battery 400V

Specs, setups and prices

myenergi libbi

4.6 kWh usable · from £1,600 published price

Compare: vs Powerwall 3

Specs, setups and prices

Sunsynk W5.3 with ECCO inverter

4.79 kWh usable · from £1,395 published price

Compare: vs EVO 10

Specs, setups and prices

Work out what you need

Questions people ask

What battery works with my Growatt inverter?

It depends on the model. Growatt's configuration list pairs the single-phase SPH BL-UP and SPA inverters with its low-voltage ARK LV, AXE LV, ALP LV or GBLI 6532 batteries, and the battery-ready MIN TL-XH and MOD TL3-XH with its high-voltage ARK XH or APX HV. The newer MIN TL-XH2 datasheet lists APX batteries.

Can I use a Pylontech or other non-Growatt battery with a Growatt SPH?

Growatt's SPH BL-UP manual says that if the inverter is paired with a lithium battery, the battery should be bought from Growatt. Only lead-acid batteries can be bought elsewhere. Using another brand of lithium battery isn't covered by the Growatt documents we hold.

My Growatt inverter is solar only. Can I add a battery?

If it has no battery input, you can add a battery with its own inverter alongside it: myenergi, Tesla, Enphase and Sunsynk say in general terms that their systems can be added to existing solar. Growatt's own AC-coupled range is the SPA. Growatt describes its MIN TL-XH and XH2 as battery-ready: they take a Growatt high-voltage battery directly.

How big a battery can a Growatt SPH run?

Storage can go up to 50 kWh with AXE LV modules, but power is capped by the inverter: the SPH BL-UP datasheet gives 3–4 kW continuous charge and discharge, and up to 4 kW of backup output.

Does a Growatt hybrid need a backup box?

Not the SPH or SPA: Growatt's configuration list says backup is built in, switching in under 10 ms on the SPH BL-UP. The MIN TL-XH2 needs Growatt's SYN 50-XH-10 for backup, and the MOD TL3-XH(BP) the SYN 100-XH-30.

Sources

  1. Enphase Energy System planning guide — single-phase backup systems (UK) — Enphase, TEB-00305-1.0, July 2025. Checked 26 Sept 2026.
  2. Powerwall 3 Datasheet (UK) — Tesla, 2026. Checked 26 Sept 2026.
  3. Sunsynk ECCO SUN-3.6/5/6/7.6/8K-SG05LP1-EU datasheet (2022 edition) — Sunsynk. Checked 26 Sept 2026.
  4. libbi Home Battery datasheet (DS-00001) — myenergi, Revision A, October 2023. Checked 26 Sept 2026.
  5. Growatt Energy Storage Configuration Quick Check List — Growatt, January 2024 (file dated 25 Jan 2024). Checked 2 Oct 2026.
  6. SPH 3000-6000TL BL-UP datasheet — Growatt, 202604. Checked 2 Oct 2026.
  7. SPH 3000-6000TL BL-UP User Manual — Growatt, EN 202512. Checked 2 Oct 2026.
  8. MIN 2500-6000TL-XH2 datasheet — Growatt, 202607. Checked 2 Oct 2026.
  9. MOD 3000-10000TL3-XH(BP) datasheet — Growatt, EN 202608. Checked 2 Oct 2026.
  10. SPA 4000-10000TL3 BH-UP product page — Growatt. Checked 2 Oct 2026.

EnergyPicker is independent and not affiliated with Growatt. Always confirm your final design with an MCS-certified installer.