Adding a battery to a Huawei inverter

Most Huawei SUN2000 inverters are hybrids with a battery input, and the battery Huawei lists for them is its own LUNA2000. The LUNA2000-S1 works with the L1, M1, MAP0, LC0 and MB0 inverters; the M1 needs a firmware update first. Older M0 inverters are a special case. On a single-phase L1 you can also add a different brand of battery alongside, with its own inverter.

Compatibility by existing system

“General statement” means the battery maker says it can be added to existing solar in general, without naming Huawei. Your installer should confirm the details.

Your existing systemHuawei LUNA2000-S1Tesla Powerwall 3Enphase IQ Battery 5Pmyenergi libbiSunsynk W5.3 with ECCO inverter
Huawei SUN2000-L1 single-phase inverter (2–6 kW)CompatibleHuawei's L1 datasheet lists LUNA2000-5/10/15-S0 and LUNA2000-7/14/21-S1 as its compatible batteries. One battery stack per inverter with a Smart Dongle or direct connection; up to two through Huawei's EMMA controller.Backup: Backup needs Huawei's Backup Box-B0 or SmartGuard-63A-S0.Source: Huawei datasheet, Input (DC Battery): Compatible battery; Output: Backup power outputSource: Huawei manual, p.27–28, Table 2-4 and noticeWorks via AC couplinggeneral statementNeeds: Tesla Remote Meter and solar CT (as drawn in Tesla's example); Backup Gateway 2 for backupTesla's UK datasheet shows an existing (AC-coupled) solar inverter alongside Powerwall 3, measured by a Tesla Remote Meter with a solar CT. Not specific to this brand.Source: Tesla datasheet, p.7, Partial Home Backup ... and AC Coupled SolarWorks via AC couplinggeneral statementEnphase's UK planning guide covers retrofitting IQ Battery 5P to an existing string-inverter solar system. General statement, not specific to this brand.Backup: Needs an IQ System Controller 3 INT. In backup, the solar that can stay on is limited to 100% of battery power with a string inverter.Source: Enphase manual, Key considerations: Retrofit; sizing guideline 4Works via AC couplinggeneral statementmyenergi says libbi can be added to any existing solar system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableWorks via AC couplinggeneral statementSunsynk says the ECCO hybrid inverter can AC couple to retrofit an existing solar system. General statement, not specific to this brand.Source: Sunsynk datasheet, p.1, features
Huawei SUN2000-M1 three-phase inverter (3–10 kW)Compatible with conditionsHuawei's LUNA2000-S1 manual lists the SUN2000-(3KTL-10KTL)-M1, which must first be upgraded to firmware SUN2000MA V100R001C00SPC161 or later. Up to two battery stacks per inverter. Huawei says off-grid backup on the M1 needs at least two battery modules.Source: Huawei manual, p.25–27, Networking notes and Table 2-4Not documentedNot documentedNot documentedNot documented
Huawei SUN2000-MAP0, -LC0 or -MB0 inverterCompatibleHuawei's LUNA2000-S1 manual lists the SUN2000-(8K, 10K)-LC0, SUN2000-(5KTL-12KTL)-MAP0 (2 battery stacks each) and SUN2000-(12K-25K)-MB0 (4 battery stacks).Source: Huawei manual, p.27, Table 2-4Not documentedNot documentedNot documentedNot documented
Huawei SUN2000-M0 three-phase inverter (older)Not documentedNot documentedNot documentedNot documentedNot documented

Not listed: Sigenergy SigenStor, Fox ESS EVO 10, SolarEdge Home Battery 400V, SolaX X1-IES, EcoFlow OCEAN 2, AlphaESS SMILE-G3, Sungrow SBR. We haven't found manufacturer documentation for adding these to an existing Huawei system, so we don't claim they work.

Which Huawei inverter do you have?

The model is on the label on the side of the inverter, and in the FusionSolar app. From Huawei's LUNA2000-S1 manual and L1 datasheet:

InverterLUNA2000-S1 stacksWhat to know
SUN2000-(2KTL-6KTL)-L1 (single-phase)1, or 2 with EMMABattery charging up to 5,000 W. Battery discharge is capped by the inverter: 2,200 W (2KTL) to 5,000 W (5KTL and 6KTL).
SUN2000-(3KTL-10KTL)-M1 (three-phase)2Needs firmware SUN2000MA V100R001C00SPC161 or later. For off-grid backup, at least two battery modules.
SUN2000-(5KTL-12KTL)-MAP0, SUN2000-(8K, 10K)-LC02Listed in the S1 manual.
SUN2000-(12K-25K)-MB04Listed in the S1 manual.
SUN2000-(3KTL-10KTL)-M0 (older)Not listedSee below.

A stack is one LUNA2000-S1 control unit with one to three battery modules. Sources: LUNA2000-(7/14/21)-S1 User Manual, Issue 02, p.25–28; SUN2000-L1 datasheet 04-202403.

If you have an older M0 inverter

Huawei's 2021 FAQ for the original LUNA2000 battery says M0 inverters with serial numbers from HV191 to HV199 are not compatible. At the time, Huawei said it would replace those with an M1 free of charge during the standard warranty period, through its local service team. Other M0 inverters worked with that battery after a firmware update to SPC135 or later.

The current LUNA2000-S1 manual doesn't list the M0, so we don't say the S1 works with it. Ask Huawei or your installer, or look at a battery that goes alongside your existing solar instead.

Source: LUNA2000 Smart String ESS FAQ, Version 02 (2021-11-09), p.2.

What else you'll need

Huawei's approved battery list

Huawei publishes the batteries it approves for its SUN2000-L1 single-phase inverters (the datasheet's battery input). The models as Huawei lists them:

Battery brandApproved models
Huawei LUNA2000-S1See our specs and pricesLUNA2000-7-S1 · LUNA2000-14-S1 · LUNA2000-21-S1
Huawei LUNA2000-S0 (earlier)LUNA2000-5-S0 · LUNA2000-10-S0 · LUNA2000-15-S0

No other brands are on Huawei's list.

  • The datasheet lists only Huawei's own LUNA2000 batteries. For other Huawei inverters, the LUNA2000-S1 manual lists which models it works with (see the table above).

Source: SUN2000-2/3/3.68/4/4.6/5/6KTL-L1 Smart Energy Controller datasheet, 04-202403, Input (DC Battery): Compatible battery. Checked 26 Sept 2026.

Choosing a battery for your Huawei system

Batteries we cover that are documented for at least one Huawei setup. Each page has the full specs, the setups you can buy, published UK prices and head-to-head comparisons.

Huawei LUNA2000-S1

6.9 kWh usable · from £2,279 published price

Compare: vs Powerwall 3 · vs SigenStor

Specs, setups and prices

Tesla Powerwall 3

13.5 kWh usable · sold through installers

Compare: vs SigenStor · vs EVO 10 · vs IQ Battery 5P

Specs, setups and prices

Enphase IQ Battery 5P

5 kWh usable · from £2,875 published price

Compare: vs Powerwall 3 · vs Home Battery 400V

Specs, setups and prices

myenergi libbi

4.6 kWh usable · from £1,600 published price

Compare: vs Powerwall 3

Specs, setups and prices

Sunsynk W5.3 with ECCO inverter

4.79 kWh usable · from £1,395 published price

Compare: vs EVO 10

Specs, setups and prices

Work out what you need

Questions people ask

What battery works with my Huawei inverter?

Huawei's own LUNA2000 battery. The SUN2000-L1 datasheet lists the LUNA2000-5/10/15-S0 and LUNA2000-7/14/21-S1 as its compatible batteries, and the LUNA2000-S1 manual lists the L1, M1, MAP0, LC0 and MB0 inverters.

Can I add a non-Huawei battery to my Huawei inverter?

Not to the inverter's battery input: the L1 datasheet lists only Huawei's LUNA2000 batteries. On a single-phase home you can instead add a battery with its own inverter alongside it. myenergi, Tesla, Enphase and Sunsynk say in general terms that their systems can be added to existing solar.

Is my Huawei SUN2000-M0 compatible with the LUNA battery?

Huawei's 2021 FAQ for the original LUNA2000 battery says M0 inverters with serial numbers from HV191 to HV199 are not compatible, and other M0 inverters work only after a firmware update to SPC135 or later. The current LUNA2000-S1 manual doesn't list the M0, so ask Huawei or your installer before buying an S1.

How many LUNA batteries can my Huawei inverter take?

From the LUNA2000-S1 manual: the L1 takes one battery stack with a Smart Dongle or direct connection, or two with Huawei's EMMA controller; the M1, MAP0 and LC0 take two; the MB0 takes four. Each S1 stack is one control unit with up to three battery modules.

Do I need extra hardware for backup in a power cut?

Yes. Huawei's L1 datasheet says backup power comes through its Backup Box-B0 or SmartGuard-63A-S0. Huawei's FAQ also says a meter is essential for a LUNA battery installation.

Sources

  1. Enphase Energy System planning guide — single-phase backup systems (UK) — Enphase, TEB-00305-1.0, July 2025. Checked 26 Sept 2026.
  2. Powerwall 3 Datasheet (UK) — Tesla, 2026. Checked 26 Sept 2026.
  3. Sunsynk ECCO SUN-3.6/5/6/7.6/8K-SG05LP1-EU datasheet (2022 edition) — Sunsynk. Checked 26 Sept 2026.
  4. libbi Home Battery datasheet (DS-00001) — myenergi, Revision A, October 2023. Checked 26 Sept 2026.
  5. SUN2000-2/3/3.68/4/4.6/5/6KTL-L1 Smart Energy Controller datasheet — Huawei, 04-202403. Checked 26 Sept 2026.
  6. LUNA2000-(7/14/21)-S1 User Manual — Huawei, Issue 02. Checked 26 Sept 2026.
  7. LUNA2000 Smart String ESS FAQ — Huawei, Version 02. Checked 2 Oct 2026.

EnergyPicker is independent and not affiliated with Huawei. Always confirm your final design with an MCS-certified installer.