Adding a battery to a GoodWe inverter

GoodWe approves its own Lynx Home batteries plus BYD, Pylontech, LG, Dyness and others, matched to each inverter family. The key question is whether your GoodWe takes a low-voltage battery (ES, ES G2) or a high-voltage one (EH, ET). If your GoodWe is solar only, its BH inverter adds a high-voltage battery alongside.

Compatibility by existing system

“General statement” means the battery maker says it can be added to existing solar in general, without naming GoodWe. Your installer should confirm the details.

Your existing systemTesla Powerwall 3Enphase IQ Battery 5Pmyenergi libbiSunsynk W5.3 with ECCO inverter
GoodWe single-phase solar-only inverter (no battery input)Works via AC couplinggeneral statementNeeds: Tesla Remote Meter and solar CT (as drawn in Tesla's example); Backup Gateway 2 for backupTesla's UK datasheet shows an existing (AC-coupled) solar inverter alongside Powerwall 3, measured by a Tesla Remote Meter with a solar CT. Not specific to this brand.Source: Tesla datasheet, p.7, Partial Home Backup ... and AC Coupled SolarWorks via AC couplinggeneral statementEnphase's UK planning guide covers retrofitting IQ Battery 5P to an existing string-inverter solar system. General statement, not specific to this brand.Backup: Needs an IQ System Controller 3 INT. In backup, the solar that can stay on is limited to 100% of battery power with a string inverter.Source: Enphase manual, Key considerations: Retrofit; sizing guideline 4Works via AC couplinggeneral statementmyenergi says libbi can be added to any existing solar system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableWorks via AC couplinggeneral statementSunsynk says the ECCO hybrid inverter can AC couple to retrofit an existing solar system. General statement, not specific to this brand.Source: Sunsynk datasheet, p.1, features
GoodWe ES / ES G2 single-phase hybrid (low-voltage battery)Not documentedNot documentedWorks via AC couplinggeneral statementmyenergi lists "I have solar and a battery already and want to add more storage" as a supported retrofit: libbi goes alongside the existing system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableNot documented
GoodWe EH single-phase hybrid (high-voltage battery)Not documentedNot documentedWorks via AC couplinggeneral statementmyenergi lists "I have solar and a battery already and want to add more storage" as a supported retrofit: libbi goes alongside the existing system. General statement, not specific to this brand.Source: myenergi datasheet, p.1–2, Flexible install; use-case tableNot documented
GoodWe ET three-phase hybridNot documentedNot documentedNot documentedNot documented

Not listed: Sigenergy SigenStor, Fox ESS EVO 10, SolarEdge Home Battery 400V, Huawei LUNA2000-S1, SolaX X1-IES, EcoFlow OCEAN 2, AlphaESS SMILE-G3, Sungrow SBR. We haven't found manufacturer documentation for adding these to an existing GoodWe system, so we don't claim they work.

Low voltage or high voltage: which GoodWe do you have?

Your GoodWe inverterBattery typeExamples from GoodWe's list
ES, EM, ES G2, ES Uniq (single-phase)Low voltageGoodWe Lynx Home U and A · BYD Battery-Box Premium LVS, LVL 15.4, LV5.0 · LG RESU 3.3–13 · Pylontech US2000/US3000/US5000, Force L1/L2 · Dyness
EH (single-phase), ET 5–10 kW (three-phase)High voltageGoodWe Lynx Home F, F G2 and D · BYD Battery-Box Premium HVS and HVM · Pylontech Force H (EH) · Dyness Tower (EH)
BH (single-phase AC-coupled retrofit), BT (three-phase)High voltageGoodWe Lynx Home F and F G2 · BYD HVS and HVM · Pylontech Force H · Dyness Tower

Not every battery size fits every inverter, and most pairings need a minimum firmware version. The full list is below. Source: GoodWe Battery Compatibility Overview, EMEA, V029.1 (10 September 2026).

GoodWe's BH: adding a battery to existing solar

GoodWe describes the BH series as a single-phase, AC-coupled retrofit inverter for high-voltage batteries. From its datasheet:

Source: GoodWe BH Series datasheet (V2.1, August 2024).

GoodWe's approved battery list

GoodWe publishes the batteries it approves for its storage inverters in Europe, the Middle East and Africa (EMEA list, September 2026). These are the brands UK buyers ask about most, with the models as GoodWe lists them.

Battery brandApproved models
GoodWe Lynx Home F / F G2 (high voltage)LX F6.6-H to LX F16.4-H · LX F9.6-H-20 to LX F28.8-H-20
GoodWe Lynx Home D (high voltage)LXD5.0-10 · Lynx D G2 GW5.1/6.0/8.3/9.0-BAT-D (ET 15–30 kW and ET G2)
GoodWe Lynx Home U / A (low voltage)LX U5.4-L, LX U5.4-20, LX U5.0-30 · LX A5.0-10, LX A5.0-30
BYDBattery-Box Premium HVS 5.1–12.8 and HVM 8.3–22.1 (high voltage) · Battery-Box Premium LVS / LVL 15.4, LV5.0 and LV5.0+ (low voltage) · HVS+, HVM+, HVB (ET 15–30 kW and ET G2)
PylontechForce H1, H2, H3 and Powercube H1 (EH, BT, BH) · US2000/US3000/US2000C/US3000C, Force L1/L2, US5000 (low voltage)
LGRESU LV 3.3–13 and 6.4 EX (low voltage) · RESU Flex (ET Plus+ only) · RESU10H Type-R, RESU10H and RESU16H Prime (selected high-voltage inverters)
DynessTower T7–T21 and Tower Pro TP7–TP23 (high voltage) · DYNESS-LV, Powerbox F, DL5.0C, Power Box G2, PowerBrick (low voltage)

Also on the list: OLOID, Soluna, Alpha ESS, Tecloman, UZ Energy, iPotisEdge.

  • GoodWe says only batteries in this document are approved for connection to its storage inverters under the GoodWe Limited Warranty.
  • Most pairings need a minimum inverter firmware version, which the list gives; your installer should check it.
  • Low-voltage batteries go with the ES, ES G2, EM and ES Uniq; high-voltage batteries with the EH, ET, BH and BT. Not every model fits every inverter.
  • Alpha ESS batteries need a matching solution from Alpha ESS, because their CAN wiring doesn't match GoodWe's.

Source: Battery Compatibility Overview (EMEA), V029.1, 10 Sep 2026, pp.1–5, low- and high-voltage tables. Checked 3 Oct 2026.

Choosing a battery for your GoodWe system

Batteries we cover that are documented for at least one GoodWe setup. Each page has the full specs, the setups you can buy, published UK prices and head-to-head comparisons.

Tesla Powerwall 3

13.5 kWh usable · sold through installers

Compare: vs SigenStor · vs EVO 10 · vs IQ Battery 5P

Specs, setups and prices

Enphase IQ Battery 5P

5 kWh usable · from £2,875 published price

Compare: vs Powerwall 3 · vs Home Battery 400V

Specs, setups and prices

myenergi libbi

4.6 kWh usable · from £1,600 published price

Compare: vs Powerwall 3

Specs, setups and prices

Sunsynk W5.3 with ECCO inverter

4.79 kWh usable · from £1,395 published price

Compare: vs EVO 10

Specs, setups and prices

Work out what you need

Questions people ask

What battery works with my GoodWe inverter?

It depends on whether your inverter takes a low- or high-voltage battery. GoodWe's EMEA list pairs the ES and ES G2 with low-voltage batteries (GoodWe Lynx Home U and A, BYD LV, LG RESU, Pylontech US and Force L, Dyness) and the EH and ET with high-voltage ones (Lynx Home F and D, BYD HVS and HVM, Pylontech Force H, Dyness Tower).

Does using a non-approved battery affect my GoodWe warranty?

GoodWe says only the batteries in its compatibility overview are approved for connection to its storage inverters under the GoodWe Limited Warranty.

Can I add a battery to an existing solar system with GoodWe?

Yes. GoodWe's BH series is a single-phase AC-coupled retrofit inverter for high-voltage batteries (85–460 V), at 3 to 6 kW. It sits alongside your existing solar inverter.

Can I use a Pylontech battery with GoodWe?

Yes, on listed models. Pylontech's low-voltage US and Force L batteries are approved for the ES, EM and ES G2 families, and the high-voltage Force H and Powercube H1 for the EH, BT and BH, with minimum firmware versions and unit limits.

My GoodWe inverter is solar only. What are my options?

Add GoodWe's BH AC-coupled inverter with a listed high-voltage battery, or a battery with its own inverter: myenergi, Tesla, Enphase and Sunsynk say in general terms that their systems can be added to existing solar.

Sources

  1. Enphase Energy System planning guide — single-phase backup systems (UK) — Enphase, TEB-00305-1.0, July 2025. Checked 26 Sept 2026.
  2. Powerwall 3 Datasheet (UK) — Tesla, 2026. Checked 26 Sept 2026.
  3. Sunsynk ECCO SUN-3.6/5/6/7.6/8K-SG05LP1-EU datasheet (2022 edition) — Sunsynk. Checked 26 Sept 2026.
  4. libbi Home Battery datasheet (DS-00001) — myenergi, Revision A, October 2023. Checked 26 Sept 2026.
  5. Battery Compatibility Overview (EMEA) — GoodWe, V029.1, 10 Sep 2026. Checked 3 Oct 2026.
  6. BH Series single-phase AC-coupled retrofit inverter datasheet — GoodWe, 20240801 V2.1. Checked 3 Oct 2026.

EnergyPicker is independent and not affiliated with GoodWe. Always confirm your final design with an MCS-certified installer.